Stainless steel material for machining large mechanical parts
1. The first is the requirement for the hardness of the material. For some occasions, the higher the hardness of the material, the better, but it is limited to the hardness requirements of the machined parts. The material to be machined cannot be too hard. If it is harder than the machine parts, it cannot be machined.
2. Secondly, the material should be moderately soft and hard, at least one grade lower than the hardness of the machine parts. At the same time, it also depends on the function of the machined parts and the reasonable selection of materials for the parts.
In short, there are still some material requirements for large-scale machining, and not all materials are suitable for processing, such as materials that are too soft or too hard, the former is not necessary for processing, while the latter cannot be processed.
Therefore, in general, for mechanical processing, the material quality should be lower than the hardness of the machine tool, so that it can be processed. Not all materials can be precision machined. Some materials have too much hardness and exceed the hardness of the machined parts, which may break the parts. Therefore, these materials are not suitable for processing large mechanical parts, unless they are made of special materials. finished parts, or laser cutting.
Dongguan Yejia Precision Machinery Co., Ltd. has CNC large-scale gantry machining centers, CNC machining centers, precision CNC milling machines, lathes, large surface grinders, precision shape correction machines, CMM three-coordinate measuring machines, electronic altimeter and other advanced manufacturing and testing equipment more than 90 sets.The maximum size that can be processed is 5000×3200×1000mm, and the machining accuracy can reach 0.002.
Welcome to contact Janice for more information: sales2@yejiavi.com / +86-13326893009 .
![](/en/uploads/220314/3-220314112K03V.jpg)